top of page
ro-uv-water-purifier-repair-service_edited.png

Our Services

water-purifier
Aquaguard

Start by understanding your water type. There are two main types:  
 

  • Hard water

  • Soft water
     

The key difference lies in the level of total dissolved solids (TDS). Hard water, often found in underground sources, has high levels of dissolved solids like magnesium and calcium. Soft water, typically from surface sources (like rivers and lakes), has low TDS content.


Hard water can be detrimental to your health and may contain contaminants. In this case, a reverse osmosis (RO) Water Purifier is recommended for effective purification. However, for soft water, a UV purifier is sufficient to eliminate microorganisms like harmful bacteria,  viruses, and protozoa.  

What We
Offer

03

Aquasure Service Center

Trusted brand for over 10 years

8500+ certified service technicians

Service centres in 800+ 

AMC applicable all over pune

05

Water Purifier Service

Sedi Shield Removes dirt, mud, sand, and dust up to 5 Micron and removes 30x impurities compared to local filters from water. Stage 2: Particulate Filter Eliminates pathogenic particles and suspended matter which prevents electronics parts from clogging, thereby extending the Purifiers' lifespan Stage 3: Chemi Block Protection against chemicals, odor, and bad taste. 100% Carbon treatment & 10x more effective compared to local filters Stage 4: 3in 1 RO 3 in 1 RO with Nanopore Technology removes germs,microplastics,heavy metals and toxic waste

02

Ro Service

Filter and tank cleaning

Unlimited repair visits

Trained technicians

1-4 visits a year, based on plan

04

Aquaguard Ro Service

The Aquaguard Health Protect RO features advanced 3-in-1 RO technology powered by Nanopore Technology, effectively eliminating germs, microplastics, heavy metals, and toxic waste while providing the combined benefits of RO, UV, and UF purification. It ensures exceptional protection with 99.9999% bacteria and 99.99% virus reduction and is 30 times more

06

Instalation 

Make sure that your Sure from Aquaguard® is installed by a trained  Service Technician only. 1. Input water must be tested for Total Dissolved Solids (TDS) and Total Hardness 2. Install your Aquaguard® in a dry ventilated place - Keep it away from direct sunlight, heating devices or areas below freezing temperatures - You can keep it on the kitchen counter or wall-mount it - The purifier should be placed in area which is free of ants/in sects/other pests 3. Ensure that the input tap water temperature is in the range of

1. If the input water iron content is more than 0.3 mg/liter, use of an iron remover* is recommended as a pre-treatment. 2. If the input water turbidity is more than 5 NTU or comprises colloidal particles, use of a special filter* is required as a pre-filter. 3.If the input water TDS is more than 1,000 ppm (mg/L) or input water hardness is more than 300 ppm (mg/L), use of a Membrane life enhancer* is recommended 4. Do not install the water purifier if the TDS is more than that prescribed in the technical specifications

Mahesh

Aquagaurd

CONTACT US 24/7

CALL US

All Over Pune City

Upload File
Upload supported file (Max 15MB)
bottom of page